Tight Gas Fracturing Technology and Patent Report

Background

Introduction

Global demand for natural gas is increasing day by day as due to rapidly growing gas market of developing countries. As more nations are switching to environmentally cleaner fuels to maintain the economic growth and reducing the impact of increasing high oil price. Natural gas is emerged as an excellent environmentally clean fuel as it emits 43% fewer carbon emissions the coal and 30% fewer emissions than oil for each energy delivered. In order to fulfill the increasing demand of energy requirement and reducing greenhouse gas emission. “The quickest and cheapest way to cut CO2 emissions from the global power sector is to grow the presence of natural gas,” said Shell’s exploration Chief Malcolm Brinded in a speech late last year. Shell-Malcolm Brinded

Global Natural Gas Demand

Global Natural gas demand prediction by EIA

According to the U.S. Energy Information Agency (EIA) latest report the global demand for natural gas is expected to grow significantly as more nations are switching to environmentally cleaner fuels such as Natural Gas. Majority of the rapidly growing gas markets are in emerging economies in Asia, particularly India and China, the Middle East and South America. EIA also shows worldwide natural gas demand grew by 57 Bcf/d from 2000 to 2007, nearly 25%. The EIA also projects global natural gas demand to grow over 40 Bcf/d by the year 2015, and projects a further growth in demand of over 50 Bcf/d by 2025.

Outlook for LNG.pdf EIA-Report

Current Scenario

Bentley R. W., 2002 of The Oil Depletion Analysis Centre London studied on Global oil & gas depletion: An overview. It shows that the world’s production of conventional hydrocarbons will soon decline. Global conventional oil supply is currently at political and physical risk. This is because the sum of conventional oil production from all countries in the world, except the five main Middle-East suppliers, is near the maximum set by physical resource limits. A large investment in Middle-East oil production is needed to overcome this physical risk, and to fulfill the increasing demand of hydrocarbon across the globe. Figure 2 Shows the global conventional oil distribution of the world’s, conventional oil that has been consumed (dark shading), and the currently discovered reserves (light colour). The figure uses industry (proved and probable) data for reserves (not public domain ’proved’ reserves), and excludes oil yet to- find. The major concluding points from this figure shows the world is about halfway through its effective recoverable resource base and North America has burnt about three-quarters of its recoverable conventional oil resource.

For conventional gas, since less gas has been used so far compared to oil, the world will increases its dependability to gas as oil declines. Figure 3 Shows the global conventional gas distribution of the world’s, conventional gas that has been consumed (dark shading), and the currently discovered reserves (light colour). The figure uses industry (proved and probable) data for reserves (not public domain ’proved’ reserves), and excludes oil yet to- find. The major concluding points are Europe has a little way to go before its gas peak, and the world as a whole is about halfway to its gas peak. When the ’clocks’ on this figure tick round to perhaps 8 or 9 o’clock, gas decline sets in with the decline likely to be fairly steep.

[1]

[2]

Present scenario shows that with the physical resource limits and depletion of oil there is exponential increase the demand of gas. The global peak in all hydrocarbons (oil plus gas) is likely to be in about 10 or so years. Thus there is do or die situation for development of unconventional reservoir across the globe for avoiding the situation of energy crisis in the world. http://greatchange.org/ov-bentley,global_depletion.pdf Global Depletion-Bentley

Natural Gas Distribution

Worldwide Natural gas resources shows North America contain the largest reserves of 300 Trillion cubic meters in which unconventional resources is around 230 Trillion cubic meters. Former Soviet country shows second largest reserves of 270 Trillion cubic meters in which unconventional resources is around 140 Trillion cubic meters. China and India also contain the reserves of 160 Trillion cubic meters in which unconventional resources is around 145 Trillion cubic meters. African countries, Latin America, Western Europe and others show the presence of Unconventional resources.

Worldwide Natural gas resources

Fig. 4 Worldwide distribution of Natural Gas Resources

Fig.5 U.S Natural Gas Production, prediction from 1990 to 2035 year

U.S. Energy Information Administration’s preview of its 2012 Annual Energy Outlook is the forecast for natural gas. EIA says that gas from shale and tight gas will account for 70 percent of the United States’ overall natural gas supply in 2035. It is clearly visible from the Figure 5 that there’s been a surge in shale gas production since roughly 2005. The major reason for this surge in shale gas production is due to surge in new hydraulic fracturing and horizontal drilling techniques, which helps in unlocking vast shale gas formations in states including Pennsylvania, North Dakota and Texas. And similar development is dawning in Ohio and other states too of North America.EIA-Shale report

Tight Gas

• Tight gas refers to natural gas reservoirs locked in extraordinarily impermeable, hard rock, making the underground formation extremely "tight." Tight gas can also be trapped in sandstone or limestone formations that are typically impermeable or nonporous, also known as tight sand. In other words, the pores in the rock formation in which the gas is trapped are either irregularly distributed or badly connected with overly narrow capillaries, lessening permeability or the ability of the gas to travel through the rock. Without secondary production methods, gas from a tight formation would flow at very slow rates, making production uneconomical.
• While conventional gas formations tend to be found in the younger Tertiary basins, tight gas formations are much older. Deposited some 248 million years ago, tight gas formations are typically found in Paleozoic formations. Over time, the rock formations have been compacted and have undergone cementation and recrystallisation, which all reduce the level of permeability in the rock. Tight gas-Rigzone.

Conventional and Unconventional Reservoirs

Conventional reservoirs are those that can be produced at economic flow rates and that will produce economic volumes of oil and gas without large stimulation treatments or any special recovery process. Conventional reservoir is essentially a high to medium permeability reservoir in which one can drill a vertical well, perforate the pay interval, and then produce the well at commercial flow rates and recover economic volumes of oil and gas.

Unconventional reservoir is one that cannot be produced at economic flow rates. Typical unconventional reservoirs are tight-gas sands, coal-bed methane, heavy oil, and gas shales. Unlike conventional reservoirs, which are small in volume but easy to develop, unconventional reservoirs are large in volume but difficult to develop. Increasing price and the improved technology are the key to their development and the future. Unconventional resources are probably very large, but their character and distribution are not yet well understood. It is known to exist in large quantity but does not flow easily toward existing wells for economic recovery.

Increase in cost and technological challenges when moving from conventional to unconventional gas recovery methods. Tight Gas Reservoirs--GC Naik.

Conventional gas reserve

Unconventional gas reserve

• Conventional gas picture: Thin section of a conventional sandstone reservoir that has been injected with blue epoxy. The blue areas are pore space and would contain natural gas in a producing gas field. The pore space can be seen to be interconnected so gas is able to flow easily from the rock.

• Unconventional gas picture: Thin section Photo of a tight gas sandstone. The blue areas are pores. The pores are irregularly distributed through the reservoir and the porosity of the rock can be seen to be much less than the conventional reservoir.

Unconventional Gas Resources Typical unconventional reservoirs are

• Tight-gas Sands - formed in sandstone or carbonate (called tight gas sands) with low permeability which prevents the gas from flowing naturally.
• Coal-bed Methane - formed in coal deposits and adsorbed by coal particles.
• Gas Shales - formed in fine-grained shale rock (called gas shales) with low permeability in which gas has been adsorbed by clay particles or is held within minute pores and microfractures.
• Methane Hydrates – a crystalline combination of natural gas and water, formed at low temperature and high pressure in places such as under the oceans and permafrost

Properties of Tight Gas

S. No	Properties of Tight Gas
1	Matrix permeability	1 µD to 0.1 mD
2	Porosity	3-5% to 15-20 % (effective)
3	No or limited natural flow	Typically the initial flow before stimulation is less than 0.5 MMscfd (~15.000 Sm3/d)

Source: Total, EBN – TNO Tight Gas Symposium

Map of unconventional reserves (Shale,Tight,Coalbed methane) in the world

• The world map representing unconventional gas reserves in various regions. It includes Shale gas, Coalbed methane and Tight gas.

Unconventional gas reserves in World-Pacwest

Distribution of Tight Gas across the world

S.No	Region	Tight-Sand Gas Volume (Trillion-cubic feet)
1	North America	1,371
2	Latin America	1,293
3	Western Europe	353
4	Central and Eastern Europe	78
5	Former Soviet	901
6	Union Middle East and North Africa	823
7	Sub-Saharan Africa	784
8	Centrally planned Asia and China	353
9	Pacific (Organization for Economic Cooperation and Development)	705
10	Other Asia Pacific	549
11	South Asia	196
12	World	7,406

Tight Gas-Texas A&M Univ

Recovery of Tight Gas

The steps involved in tight gas recovery are:

• Seismic investigation: Extensive seismic data is gathered and analyzed to determine where to drill and just what might be located below the earth's surface. These seismic surveys can help to pinpoint the best areas to tap tight gas reserves. Not only providing operators with the best locations for drilling wells into tight gas formations, extensive seismic surveys can help drilling engineers determine where and to what extent drilling directions should be deviated.

• Drilling: In a tight gas formation, it is important to expose as much of the reservoir as possible, making horizontal and directional drilling a must. Here, the well can run along the formation, opening up more opportunities for the natural gas to enter the wellbore.A common technique for developing tight gas reserves includes drilling more wells. The more the formation is tapped, the more the gas will be able to escape the formation. This can be achieved through drilling myriad directional wells from one location, lessening the operator's footprint and lowering costs.

• Production Stimulation: After seismic data has illuminated the best well locations, and the wells have been drilled, production stimulation is employed on tight gas reservoirs to promote a greater rate of flow. Production stimulation can be achieved on tight gas reservoirs through both fracturing and acidizing the wells.

• Hydraulic Fracturing: Fracturing, also known as "fracing," a well involves breaking the rocks in the formation apart. Performed after the well has been drilled and completed, hydraulic fracturing is achieved by pumping the well full of frac fluids under high pressure to break the rocks in the reservoir apart and improve permeability, or the ability of the gas to flow through the formation.

• Acidizing: Acidizing the well is employed to improve permeability and production rates of tight gas formations. Acidation involves pumping the well with acids that dissolve the limestone, dolomite and calcite cement between the sediment grains of the reservoir rocks. This form of production stimulation helps to reinvigorate permeability by reestablishing the natural fissures that were present in the formation before compaction and cementation.

• Deliquification: Furthermore, deliquification of the tight gas wells can help to overcome some production challenges. In many tight gas formations, the reservoirs also contain small amounts of water. This water can collect and undermine production processes. Deliquification is achieved in this instance through artificial lift techniques, such as using a beam pumping system to remove the water from the reservoir, although this has not proven the most effective way to overcome this challenge.

Tight gas-Rigzone

Challenges for Tight Gas Recovery

• During the last decade new technologies as 3-D seismic, horizontal drilling, and improved fracture stimulation have had significant impacts on natural gas production in many tight gas reservoirs in Middle East and North Africa. Some of the challenges in this recovery are:

1) Sub-Surface Understanding

2) Formation Evaluation Technology

3) Drilling Technology

4) Completion & Stimulation Technology

5) Environmental safety

• Geomechanics and Sub-Surface Understanding: Fundamental to any improvement in performance is done by having a clear understanding of the sub-surface environment. Understanding permeability, although at very low values compared to conventional reservoirs, is a key to maximizing productive capabilities. Subtle differences in tight gas reservoir properties can result in large changes in permeability, and mark the difference between productive and non-productive intervals.Geomechanics and subsurface understanding is a critical component in understanding the nature of the formation. All companies recognise the need to use geomechanics to assess natural fracture patterns.

• Formation Evaluation Technology: The objectives of Formation Evaluation are,to ascertain if commercially producible hydrocarbons are present, determine the best means for their recovery, to derive lithology and other information on formation characteristics for use in further exploration and development. Lack of accuracy for all porosity logs. There are strong limits to the application of NMR logging in low porosity, low permeability gas bearing formation.

• Drilling Technology: The challenge in any tight gas development is to use technology to push up the estimated ultimate recovered volume per well, and the produced volumes (flow), while simultaneously pushing down costs. Specialized drilling practices, application of drill bits for less wellbore damage , Specialized drilling fluids are few challenges that is to be overcomed.

• Completion & Stimulation Technology: One of the most important areas where technology can make a difference, is the ability to make small but extensive fractures in the correct places in the tight rock (‘fraccing’). This provides the gas molecules with a passage to move more easily through the reservoir to the wellbore. Fracturing techniques use a significant amount of energy to create the pressure used to crack the rock open. The first hydraulic fracturing job to be run commercially in the 1940s required just a few hundred horsepower. More recently, in examples such as the Pinedale field, power requirements can be as high as 25,000 horsepower, and costs can represent up to 30% of the well costs. Any possibility to make this more efficient has significant cost implications.

• Environmental Safety: Drilling of hundreds of wells represents a major environmental and safety challenge. Shell is tackling this challenge and is focused on improving well performance and surface engineering, which will push the business forward in a sustainable manner. Tight Gas Developments-IGU.org, Unconventional gas-NPC.org

Methodology for Patent Search

A detailed search strategy was formulated to extract relevant patents in the area. Keywords were obtained from some relevant patents, journal articles, company websites and other thesauri. Class-codes were obtained from the background reading and citation check of few relevant patents and from different other databases like USPTO, WIPO and Espacenet. Class-codes related to drilling of boreholes and well development was taken into consideration. Comprehensive search strategy was made using the combination of different keywords and complimentary class-codes in order to obtain all the relevant patents and at the same time keep away from irrelevant records.

Process-flow for patent analysis

Database used: Thomson Innovation

Countries Covered: US Grant, GB App, US App, FR App, WO App, DE Util, EP Grant, DE Grant, EP App, DE App, JP Util, JP Grant, JP App, CN Util, CN App, KR Util , KR Grant, KR App, DWPI

Years searched: Priority date: 1990-01-01 to 2011-12-22

Date of search: 22nd December 2011

Keywords: The keywords used for different concepts are

• Tight Gas: Tight gas, tight sand, tight carbonate, tight formation, tight deposit, tight strata, tight medium, impermeable formation, impermeable deposit, impermeable strata, impermeable medium, impermeable reservoir etc.

• Stimulation: Stimulation, fracturing etc.

Process-flow for patent analysis

Insights from patent analysis

All the patents obtained from the database were filtered to find out the most relevant patents, this process included going through the full text of the patent. Relevant patents related to stimulation technique for tight gas formations were found. This was followed by a detailed analysis of the relevant records. All the patents were analyzed to capture the focus of the patent, stimulation technique described in the invention and the fracturing ingredients used in the invention. The analyses of the patents lead to following observations:

Top Assignees

Schlumberger, Exxonmobil and Halliburton feature in this list.

IP Activity

The publications of patents in the last were nearly stagnant till 2007 after which one can witness a sudden surge in publication related to tight gas stimulation. For the years 1997 and 2001 there was no publication of patents related to tight gas stimulation. The last 3 years (2008-2011) has witnessed a sudden growth of publication activity, the highest being in 2011.

The IP activity by priority year saw a sudden surge in activity in the year 1994 and thereafter from 2005 onwards, where a significant IP activity was observed. The numbers are more likely to change when patents claiming priority over the last 20 years are published. There was no IP activity observed in the year 1996.

Geographical Distribution of patents

a) By unique families Since the unique family retrieved from Thomson Innovation Database was downloaded by keeping US as a first priority, hence one can see that US leads in the chart.

b) Total patent families filed across the globe

As shown in the above figure, United States has the highest filing of patent families filed across the globe. The filing spread is seen across North and South America, Europe, Russia and Australia. PCT filing also remains an important choice of assignees when it comes to filing patent globally.

Technology and Scientific Information Search Strategy

A search for extracting scientific articles was conducted.

Database used: Engineering Village (Compendex)

Scope: Subject/Title/Abstract

Years Searched: 1990-2012

Date of search: 02nd January 2012

Criteria for filtering: Only those articles related to stimulation or fracturing techniques for tight gas recovery were considered as relevant. Articles related to modeling were considered as OFF target documents. Duplicate articles were removed.

Stimulation Techniques

Graphical representation of Assignee vs Stimulation techniques

Different types of fracturing techniques are used for stimulation of tight gas reservoir. Here we have covered the patents and articles which are focusing on the application of fracturing technique for the development of the tight gas reservoir.

Hydraulic Fracturing

Graphical Representation of Assignee's holding patents of Hydraulic fracturing

Table: Hydraulic fracturing patent of different Companies.

Hydraulic Fracturing
S.No	Assignee	Patent	Comment
1	Halliburton	US20110209868A1	Fracturing of stress altered formation using signaling subsystem communicably coupled with injection tools installed in the well bore.
		US20090288833A1	Fracturing of multiple ultra-shot radius laterals from a parent well
2	Schlumberger	****	****
		****	****
		****	****
3	###	****	****
4	###	****	****
5	###	****	****

These sections now concentrate on the work done by the companies or institutes.

Halliburton

US20110209868A1 titled "Fracturing a stress-altered subterranean formation" by Halliburton. Fracturing of a stress- altered subterranean formation is difficult to perform. Fracturing of stress altered formation using signaling subsystem communicably coupled with injection tools installed in the well bore.

Signaling subsystem adapted to transmit control signals from a well bore surface to each injection tool to change the state of the injection tool according to stress condition.

It can modified stresses, thus fracture network can be created along a substantial portion of a horizontal well bore.

US20090288833A1 titled "System and methods for constructing and fracture stimulating multiple ultra-short radius laterals from a parent well" by Halliburton. Hydrocarbons are often dispersed in a stacked sequence in the reservoir. The reservoir also contains water bearing zones. Conventional equipment cannot be used for drilling and stimulation of multi lateral well as they are very time consuming, and expensive in nature. It provide a systems and methods for constructing multiple ultra-shot radius laterals from a parent well and stimulating the subterranean zones intersected by multiple lateral wellbores extending outwardly from one or more parent wellbores by injecting a stimulation fluid into the lateral wellbores; and stimulating the zones intersected by the lateral wellbores.

....[Contd]

Schlumberger

.....[Contd]

Information from the Article

Many authors have talked about massive hydraulic fracturing Ahmed et al. in 1979, Hanson, in 1981 and Schubarth et al. in 2006. Massive hydraulic fracturing (MHF) is a primary candidate for stimulating production from the tight gas reservoirs in the U.S. MHF is a more recent application that differs from hydraulic fracturing in that more fluid and proppant are pumped to create more extensive fractures in the reservoir. Application of MHF to increase production from the tight reservoirs has provided mixed and, in many cases, disappointing results especially in lenticular reservoirs (Hanson,1981)... [Contd]

Summary of Hydraulic fracturing

Various companies are using or developing different techniques for performing hydraulic fracturing in different operating condition and reservoirs.

Multi Stage Fracturing

Table: Multi Stage Fracturing patent of different Companies.

Multi Stage Fracturing
S.No	Assignee	Patent	Comment
1	Schlumberger	US20110024121A1	Fracturing multilateral wellbores in a single mobilization of fracturing unit.
2	####	****	****

These sections now concentrate on the work done by the companies or institutes.

Schlumberger

US20110024121A1 titled "Method and apparatus for multilateral multistage stimulation of a well" by Schlumberger. It employs a continuous multistage fracturing of lateral wells by wellbore isolation and focused fracturing placement. Fracturing multilateral wellbores in a single mobilization of fracturing unit(s) by sequentially connecting a fracturing tubing string to each lateral wellbore, directing a fracturing fluid at that specific lateral wellbore in a manner to achieve the desired fracturing and isolating those lateral wellbore after it is fractured.

-The technique involves drilling and fracturing a first lateral wellbore; plugging the first lateral wellbore; and then drilling and fracturing a second lateral wellbore, plugs or other suitable isolation devices to isolate lateral wellbores and to enable the fracturing of specific lateral wellbores.

Method enables the continuous pumping of fracturing fluid during fracturing of multiple lateral wellbores due to a single rig mobilization....[Contd]

Information from the Articles

Saldungary et. al., 2008 of Schlumberger, studied on Efficient Multifractured Horizontal Completion change the economic equation in Latin America; they have discussed the effect of Effective Multistage Fracturing System (EMFS). The system consists of mechanical open hole packers, are capable of withstanding high differential pressures at high operating temperatures, with specially designed fracturing ports (FracPorts), are located between the packers. It shows completion of horizontal wells in a time efficient manner (Time savings of 10 days were observed while increasing the number of frac stages from 3 to 5), and reduction in completion cost can be done easily, maximized reservoir contact and productivity in treated wells. MEFS had increased the gas production rate to 543000m³/day per well....[Contd]

Summary of Multi Stage Fracturing

From the patents, it's observed that Schlumberger employs a continuous multistage fracturing of lateral wells and focused fracturing placement....[Contd] From the articles, it can be concluded Schlumberger, is focused on effective multistage fracturing system (EMFS)....[Contd]

Slickwater Fracturing

Graphical representation of Assignee's holding patents of Slickwater fracturing

Table: Slickwater Fracturing patent of different Companies.

Slickwater Fracturing
S.No	Assignee	Patent	Comment
1	Baker Hughes	US20100089580A1	Performing fracturing method by combining proppant free stage and proppant ladden stage in two stages helps in reducing the conductivity damage.
		US7699106B2	Hydraulic fracturing treatment by using ULW (Ultra lightweight) proppant and low viscosity slick water fracturing fluid.
2	###	****	****
		****	****
3	###	****	****

These sections now concentrate on the work done by the companies or institutes.